Azuro pH plus 0,4 kg

Product detailed description

Powder preparation for increasing the pH value of the water in the hot tub.

It is used to increase the pH value in the whirlpool. Bathing water should have a pH value between 7.0 and 7.4. In this range, the most effective action of chlorine and chlorine-free products is guaranteed without side effects.

Dosage: To increase the pH value by 0.2, add approx. 10 g of the preparation to 1 m3 of water (1,000 l) (a higher dose is usually required for soft water). The calculated amount is thoroughly dissolved in water in a plastic bucket and slowly poured into the hot tub with the filter device turned on. Measurement of the pH value (with a suitable tester) must be carried out after the water has been thoroughly mixed. The procedure is repeated until the pH value is in the desired range of 7.0 - 7.4.