Azuro Wellness & Spa OXI tablets, 0.5kg

Instructions for use and dosage: Adjust the pH to 7.0-7.4 before using the product for the first time. At first water treatment and as a shock measure approx. add 1 to 2 tablets / 1 m3 of water every 2 weeks. During the whirlpool operation, add additional tablets as needed. In general, to achieve crystal clear and permanently hygienic water, the pH should be maintained at 7.0–7.4 and the active oxygen content should be maintained at 8–12 mg / l, at water temperatures above 28 ° C active oxygen concentration between 10-14 mg / l. If the active oxygen content falls below 8 mg / l, additional tablets should be added, if it is higher than 14 mg / l, reduce the dosage of the tablets and wait until this value falls within the above range. Check the active oxygen content continuously at least twice a week by suitable testers at the outlet of the whirlpool water to the filter circuit. Method of application: Float: place the required number of tablets in the dosing float. Allow the float to move freely on the surface where the movement of water is greater. With the dosing device built into the circulation pipe: place the required quantity of tablets in the dosing device. Adjust the dispense control valves to approximately maintain the active oxygen concentration. NEVER TAKE TABLETS IN THE WHY BATH!